Price.com -Bugatti's 1850 horsepower "Boled", commercialization is decided ... 40 million euros for 40 units in the world

Bugatti announced on August 13 that it will market a Circuit -only concept hypercar, Bugatti Bolide, at The Quale Motorsports Gathering, which is being held in California, USA.40 units will be produced worldwide.

Bored is the ultimate in response to what happens if Bugatti manufactures a Circuit -only hyper sports car that meets the FIA (International Automobile Federation) safety requirements.It is the first time that Bugatti has developed such a compromised circuit -dedicated car.Breede means "fireball".

◆ The overall height is 300mm lower than Shiron 995mm

Bugatti's development team has designed a lightweight monocoque made of carbon.The body is also made of high -strength carbon fiber.The strength of the carbon fiber used is at the level for the aerospace industry.

The total height of Borydo was 995mm, the same as Bugatti's famous car, Type 35.The overall height of 995mm is about 300mm lower than Shiron.The total width was 1990mm and the wheelbase was 2750mm.Like the LMP1 racing car, the door is folded diagonally.The driver sits on a 70mm side sill and then slides his legs.It is said that it is compatible with drivers up to 2m tall.

The safety was designed according to the FIA standards.Equipped with Hans devices, automatic fire extinguishing systems, ken pullers, lightweight polycarbonate windows, 6 -point harness systems, etc.The driver is a motor sports display and you can see all information.To get the optimal seating position, the pedal and footrest can be adjusted up to 150mm.

◆ 8.0 -liter W type 16 -cylinder engine + 4 turbo enhancement for Shiron

Bored is designed mainly on a W -type 16 -cylinder powertrain with an overwhelming performance with the minimum body structure pursuing weight reduction.According to Bugatti, it has achieved breathtaking performance.

The 8.0 -liter W type 16 -cylinder gasoline engine + 4 turbo for "Shiron" has been enhanced to 1850 ps and maximum torque to 188.6 kgm.Bugatti has redesigned Shiron's powertrain for the circuit and optimizes the engine and transmission to enable higher engine speeds.

Specifically, by removing the throttle of the intake and exhaust system, an engine with excellent response is possible faster.The newly developed turbocharger will have a new shape blade, gaining more boost pressure and power in high rotation.In order to achieve optimal oil lubrication even during hard cornering, the design of hydraulic, check valve, baffle, oil tank, oil reservoir, and pumps has been reviewed.The weight of the entire powertrain is also significantly reduced.

The water -cooled intercooler has been changed to an air -cooled intercooler with a water spray function.Air duct on both sides of the vehicle incorporates air for cooling.The two water coolers located in front of the front axle are the same as the F1 machine.The engine, transmission and differential air -cooled oil cooler also have a water spray function.The newly developed "Hybrid Carbonch tongue tongue torch fan radial compressor" has raised the heat dissipation of high -performance racing brake systems.

◆ The highest speed in the simulation is 500km/h or more

All materials and manufacturing processes have been reviewed to achieve 1240 kg of drying weight.All bored screws were made of titanium.Aerospace -made titanium hollow thin flesh functional parts were used in many parts.The 3D printer parts are very thin with a maximum thickness of 0.5mm.Still, it has high strength.

Aerodynamic performance has also been raised.The downforce when running 320km/h will reach 1800kg on the rear wing and 800kg for the front wing.Like the F1 machine, Borydo decelates with a ceramic disk and coated racing brake.The weight of the brake caliper is light at 2.4kg.The weight of the forged magnesium wheel with a center lock is 7.4 kg for the front and 8.4 kg for the rear.

According to Bugatti, the highest speed in Boryde's simulation is 500km/h or more.It is said that the Le Mans 24 -hour endurance race course can be circulated at 3: 07.1 and the Nürburgring Nürburgring Northern Course in 5: 23 seconds 1.

◆ Plan to start delivery to customers in 2024

Bugatti has announced that it will commercialize the bored.40 units will be produced worldwide.The price will be 4 million euros (517 million yen) with a plan to start delivery to customers in 2024.

Bugatti's President and CEO, President and CEO of Bugatti, said, "Bored has been announced as a one -off model in 2020, and many enthusiasts and collectors have hoped for commercialization. To experience this wonderful car.It will be produced only for 40 units. Currently developing a commercial model, it will be the ultimate driving machine on the circuit. "

The copyright of the information on the disclaimer related to the publication belongs to the provider company.

Bugatti

Bugatti(bugatti)の自動車（本体） ニュース

See more

Other cars (body) news

See more